K&F PL Filter for GoPro Hero 4K Cameras, Bluer Skies and Less Glare, Nano-X
R349 incl VAT
Awaiting Stock or Special Order
Awaiting Stock or Special Order
Made for beach, boat and travel clips, takes the glare off water and windows and turns skies a deeper blue
What Makes this Great:
– PL (Polarizer) Filter Type eliminates glare and surface reflections that flatten your footage.
– Press-and-Lock Bayonet Mount swaps on and off in seconds between shots so you're not fumbling with thread mounts mid-session.
– Nano-X Series Compatibility guarantees a secure fit without vignetting or interference with the camera's built-in lens cover.
– Enhanced Colour and Contrast delivers the punchy, saturated look viewers expect from action footage without post-processing.
– 28 Multi-Layer Coatings maintains contrast and colour accuracy when shooting into the sun or bright light sources.
– Scratch-Resistant Coating maintains optical clarity across hundreds of uses without the micro-scratches that degrade cheaper filters.
– Waterproof Coating on Glass keeps the lens clear during rain, spray or splashes so you don't lose the shot to water spots.
– Oil-Proof and Dustproof Coating wipes clean with a single pass instead of smearing oils across the glass.
– Aluminium Alloy Frame Material survives helmet mounts, handlebar crashes and saltwater exposure that would corrode plastic frames.
– AGC Optical Glass preserves the native image quality of your Hero 4K sensor without introducing softness or chromatic aberration.
Compatibility: Designed exclusively for the GoPro Hero 4K action camera. The filter replaces the stock protective lens cover using a press-and-lock bayonet mount: rotate the original filter off, align the tabs on this filter, and press clockwise to lock. The glass coating is water-resistant and repels splashes and rain, but the filter is not rated for underwater use, remove it before submerging the camera. Surface water sports like kayaking, surfing and jet-skiing where spray hits the lens but the camera stays above water are ideal use cases. Check your GoPro model designation before ordering; this filter is cut specifically for the Hero 4K and will not fit other Hero series models.
What's in the Box:
1 x K&F Concept PL Filter for GoPro Hero 4K – KF01.2879
Cut the glare, capture what's beneath the surface
The K&F PL Filter for GoPro Hero 4K | KF01.2879 is designed for adventure filmmakers and content creators who shoot outdoors around water, glass, or open skies where glare and washed-out footage degrade the final result. A circular polarising filter removes reflections from non-metallic surfaces like lakes, rivers, car windows, and wet rocks, letting you capture what's beneath the surface instead of a blown-out mirror effect. It also deepens blue skies and adds contrast to clouds, delivering the dramatic separation you see in professional landscape work without needing to fix it in post. Built with imported AGC optical glass and 28 multi-layer coatings, this filter maintains the GoPro's native colour profile and sharpness while protecting the fixed lens from scratches, dust, and spray. The press-and-lock bayonet mount attaches in seconds without tools, and at 47g it won't unbalance helmet mounts or gimbals. The hydrophobic coating keeps the lens clear in rain or spray so you're not constantly wiping mid-shoot. This filter is for above-water shooting only, ideal for kayaking POV, coastal hikes, waterfall scenes, or any environment where surface glare obscures your subject.
Eliminating glare from water and glass
The primary function of a PL filter is to remove polarised light reflected off non-metallic surfaces. When you're filming a waterfall, lake, or coastal scene, the sky reflection on the water surface often obscures the texture and detail beneath. The circular polariser filters out that reflection, revealing the water's movement, colour, and depth instead of a flat mirror glare. The same principle applies to car windows, wet rocks, leaves, or any glossy surface where you want to see through rather than bounce off. You rotate the filter during installation to set the correct angle for maximum polarisation, then lock it in place. This is particularly useful when shooting fast, the light is changing, or you're switching between landscape and portrait orientation for reels or stories.
Dramatic skies without post-processing
Beyond glare control, the PL filter increases saturation and contrast in blue skies and white clouds by filtering scattered polarised light. GoPro's ultra-wide lens captures huge amounts of sky, and without polarisation that sky often renders as a pale, flat wash that kills the drama of a landscape or action shot. The filter delivers richer blues and defined cloud edges straight out of the camera, reducing the need for heavy grading in post and giving your footage a more polished, professional look. This effect is strongest when shooting at a 90-degree angle to the sun, typically mid-morning or mid-afternoon, and works in both photo and video modes.
28-layer coating for optical clarity
The filter uses imported AGC optical glass with 28 multi-layer coatings, a spec that signals serious optical engineering rather than a cheap tinted-glass filter. The nano-coating includes an anti-reflection treatment that suppresses internal reflections and flare, preserving contrast and colour accuracy in high-contrast scenes where cheaper filters introduce haze or ghosting. This matters when shooting into the sun or mixed light where flare would normally wash out your subject and flatten the image. The coating also maintains neutral colour transmission, so footage shot with the filter matches your GoPro's native colour profile without the cyan or magenta shifts that budget filters introduce. You can cut between filtered and unfiltered clips in the same sequence without a visible colour break.
Scratch and weather protection
The hardened surface layer resists abrasion from sand, grit, and incidental contact during handling and storage, protecting the GoPro's fixed lens from permanent damage in environments where a scratch would ruin the camera. Desert, beach, and mountain conditions where dust and sand are unavoidable become less risky with the filter in place. The hydrophobic nano-coating causes water to bead and roll off the glass surface instead of spreading into a film, keeping the lens clear in rain, spray, or humid conditions. Filming whitewater rapids or coastal surf where spray hits the lens every few seconds becomes more practical because you're not constantly wiping the filter mid-shoot. The oil-proof coating also repels fingerprints and smudges, making cleaning faster and reducing the risk of scratching the glass with repeated wipes.
Lightweight and gimbal-safe
At 47g, the filter adds negligible mass to the GoPro's compact form factor. This maintains the camera's balance on gimbals, helmet mounts, and chest harnesses without throwing off stabilisation or adding noticeable weight. Mounting the GoPro on a drone gimbal where every gram affects flight time, or wearing it on a chest harness for hours during a hike, the filter doesn't change how the setup feels or performs. The aluminium frame is machined to tight tolerances and snaps directly onto the GoPro's lens housing without adhesive or threads, attaching and removing in seconds without tools. This lets you adapt to changing light conditions mid-shoot, switching between polarised and unpolarised shots as you move between shaded forest and open water.
The K&F PL Filter for GoPro Hero 4K | KF01.2879 is a practical upgrade for adventure filmmakers who want cleaner water shots, richer skies, and lens protection in challenging conditions. With AGC optical glass, 28-layer coatings, and a press-and-lock design that doesn't affect balance, it's a reliable tool for above-water shooting where glare and washed-out footage would otherwise degrade the final result. Capture what's beneath the surface with the KF01.2879.
Frequently Asked Questions:
Q: Will this filter work underwater or only for surface shooting?
A: The glass has a waterproof coating that repels rain and splashes, but the filter itself is not rated for submersion. Remove it before taking your Hero 4K underwater. It's built for surface water sports like kayaking, surfing and jet-skiing where spray hits the lens but the camera stays above water.
Q: Does the polarising effect rotate, or is it fixed at one angle?
A: This is a fixed-orientation polariser. Once mounted, the polarisation angle stays constant.
Q: How do I clean the filter without scratching the coating?
A: Use a microfibre lens cloth and wipe in straight passes, not circles. The scratch-resistant coating handles normal cleaning, but avoid paper towels or shirt fabric. For stubborn marks like sunscreen or salt spray, breathe on the glass to fog it slightly, then wipe. The oleophobic coating means oils lift cleanly without smearing.
Q: Does this add any vignetting or dark corners in wide-angle mode?
A: No. The filter is precision-machined to sit flush with the Hero 4K's lens housing, so it doesn't intrude into the frame edges. You'll get the full field of view your camera is capable of, with no corner darkening or soft edges.
Q: What's the warranty coverage if the filter arrives damaged or contains a manufacturing defect?
A: 12 months from purchase. Impact damage and user-caused scratches aren't covered, but manufacturing defects are.
Technical Specifications:
- Filter Type: Circular Polariser (PL)
- Compatible Models: GoPro Hero 4K
- Glass Type: AGC Optical Glass
- Multi-Layer Coatings: 28 layers (waterproof, scratch-resistant, dustproof, oil-proof)
- Frame Material: Aluminium Alloy
- Installation Method: Press-and-lock bayonet mount (rotate original filter off, align and press clockwise)
- Waterproof Rating: Coating only (filter not submersible)
- Weight: 47g (packaged)
- Warranty: 12 months











